Well, we finalized the deal for almost $3,000 worth of Hempel brand epoxy product and bottom paint today... here's the plan:
2 coats of Low Viscosity Epoxy Primer. This is a thin 2-part epoxy that flows easily. It is supposed seal up the fiberglass and fill in the pin-holes.
2 coats of Mastic
2 coats of Coal Tar Epoxy
1 coat of Chlorinated Rubber. This is a 'tie coat' that preps for the bottom paint.
4 coats of Hempel Globic Bottom Paint (in 2 colors).
We are hoping this will seal up the fiberglass bottom, keep from having more blisters, and provide good bottom paint for about 4 years of cruising the Pacific.
I've uploaded our spreadsheet with all the detailed Hempel paint product numbers. Here All this stuff was provided directly by the Hempel dealer in La Libertad (near PLYC).
I know you Facebook-ers probably aren't interested, but our fellow cruisers might be. Those of you with questions... email Dave! He'll probably put a more technical post in his Workshop section of the website when he gets a chance.
For now, we've stored all the paint stuff in a locker under the boat, so we can start applying the stuff as soon as we return.
No comments:
Post a Comment